The Helite HybridAir equestrian airbag vest is compatible with the Racesafe Motion3 protective vests sold and manufactured by Racesafe. It’s designed with bulk-reduction in mind which regular air vests and body protector combinations do not usually account for. When worn with a body protector like the Rafesafe Motion3, it is ideal for cross-country riders.

The HybridAir airbag vest can be worn over a hard shell body protector or regular apparel. Do not wear the HybridAir equestrian airbag vest under clothing or a body protector, as this can prevent the airbag from deploying properly.

Please note that the Racesafe Motion3 body protector is sold separately and is not included with the purchase of this air vest.

Features:

• Ergonomic design and possible uses: The HybridAir vest features breathable mesh and can be worn alone or with the Racesafe Motion3 body protector.
• Mechanical system: The HybridAir vest uses a mechanical system to avoid accidental triggers and battery issues, with easy cartridge changes.
• Reusable: Like the rest of the Helite product range, the HybridAir vest is reusable once the used cartridge has been replaced
• Unisex: suitable for both men and women
• Fitted low-profile design
• Breathable stretch design for comfort and movement
• Superior inflation speed at less than 0.097 seconds
• Includes one CO2 canister, lanyard and saddle strap

How to attach HybridAir to the Motion3 body protector:

• Firstly, make sure the velcro waist strap is closed on the inside of the air jacket. This acts as an additional restraint to prevent overstretching.
• Then, tuck the air jacket under the body protector tail at the back. Now it’s time to create the main connection to the body protector behind the trigger system of the air jacket.
• Open up the HybridAir on your right side. Undo the velcro tab and pull out the plastic anchor key halfway so it is only through the first loop closest to the zip. Bringing the air jacket close to your body protector, slide the anchor key on through the loop on the front of your body protector and then through the second loop on the air jacket.
• Close the velcro tab back up. The anchor key should be through all 3 loops to create a secure connection, 2 on the air jacket and the body protector loop in the middle. The card strip included can be used to help align the loops. Slide it into the second air jacket loop and then back through the body protector loop. So then as you come to slide the plastic anchor key through the first air jacket loop and body protector loop, the second air jacket loop is helpfully aligned. Then remember to remove the card strip and store for next time!
• Zip up your HybridAir and finish off by connecting the shoulders. There is a strap on the underside of the air jacket shoulder. This goes under the shoulder of the body protector, back through the loop on the inside of the body protector and then clips together. Do the same on the other side.
• Now you’ve set up the combination, you can take them on and off as one. If you decide to wear your Motion3 without your HybridAir, you’ll just need to repeat the steps to set it up again.